Back to top

2018 J Boats J/121

Mattapoisett, Massachusetts

$365,000

SHES'S NO LADY is a turn key, low maintenance, competitive sailing yacht. The J/121 offers compelling performance with a pre-planned event schedule and readily available event support, unique to J Boats. The current owner has purchased a new boat and is entertaining offers. Please read full descriptions to obtain the full inventory and recent upgrades. 

Basic Boat Info

Make: J Boats
Model: J/121
Year: 2018
Condition: Used
Category: Sail
Designer: Johnstone
Construction: Fiberglass
Has Hull ID: Yes

Dimensions

Length: 40 ft
Length Overall: 40 ft
Waterline Length: 35'9 ft
Beam: 12'4 ft
Max Draft: 7'8 ft
Displacement: 12,900 lb
Ballast: 4800 lb

Engines / Speed

Engines: 1
  • Make: YANMAR
  • Model: 3YM30ACE
  • Fuel: Diesel
  • Engine Power: 29hp
  • Type: Inboard
  • Propeller Type: 3 BladeBronze, Folding
  • Engine Location: Center
  • Drive Type: SailDrive
  • Year: 2018

Tanks

Fuel Tank Capacity: 24 gal
Water Tank Capacity: 26 gal
Holding Tank Capacity: 12 gal

Other

Heads Count: 1
Drive Type: Sail
Boat Class: Racers and Cruisers

Contact

Sarah Strauch, CPYB
Contact Sarah Strauch for more information 207.332.2239
Eastern Yacht Sales, Inc.

Office

Eastern Yacht Sales, Inc.
170 Shipyard Drive
Hingham, MA, US, 02043
Tel:781 749 8600
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Manufacturer Specifications

HULL & DECK 
•  J/121 hull & deck are vacuum-infused molded (SCRIMP process) in temperature controlled environment with biaxial and unidirectional E-glass fabrics using end grain balsa core in the hull for rugged durability and Corecell foam core in the deck for light weight.  High density core inserts and additional glass reinforcements are placed in way of highly loaded hardware and components. •  Laminates are engineered and built to exceed ISO 12215 Cat A and ABS structural standards        •  White gelcoat hull with double bootstripe.•  Molded companionway seahood with slider.•  ORC molded-in toe-rails forward of the mast.•  GRP molded main bulkhead – structurally bonded and tabbed to the hull and deck with single large opening to forepeak.•  Two watertight bulkheads (one in the forepeak and one forward of the steering system) bonded and tabbed to the hull and deck.•  Heavy duty molded fore/aft and transverse keel support grid, with substantial composite structural beams.•  Composite mast bearing beam with carbon fiber compression post, bonded and fastened to the deck.•  High aspect, low VCG “L” keel with lead ballast and epoxy faired and finished fin, flange mounted to a hull recess. 

MECHANICAL & STEERING 
•  Yanmar 3YM30ACE 3 cylinder 4-stroke 29hp diesel engine with 125 amp alternator and SD 25 saildrive with 2-piece split zinc.•  Yanmar keyless digital B instrument panel mounted in recess on cockpit wall near wheel
•  Gori THREE-blade, geared folding prop.•  Spinlock flush mount engine throttle control with removable handle and neutral safety switch.•  Balanced spade, composite rudder with stainless rudder post mounted in self aligning, Jefa rudder bearings.•  Jefa twin pedestal steering system including sheaves, radial drive, needle bearings, and integral wheel brake.•  Carbonautica custom composite wheels (2) finished in black Awlgrip.•  Emergency tiller.

DECK HARDWARE
• Harken Performa 52:1 self-tailing primary winches. • Harken Performa 46:1 self-tailing cabin top winches. • Harken Performa 46:1 self-tailing mainsheet winches. • Four Harken One-touch winch handles. • Four winch handle holders. • 6:1 Harken traveler system on cockpit floor. • Adjustable jib jead system with floating lead blocks and inhaul and outhaul capability. • Cascading cunningham system led to cockpit. • Harken spinnaker sheet and tack line blocks. • Bow-sprit control system led externally to clutch mounted on cabin top. • Mast base halyard blocks and organizers. • Halyard & tack line rope clutches. • Custom mast collar with attachment points for halyard and mast base blocks, and halyard bale. • Stainless cabin top handrails P&S. • Tapered SS lifeline stanchions. Forward stanchion with integral roller (P&S) for quick jib skirting. Double 1x19 stainless wire lifelines to meet all categories of the Offshore Special Regulations (OSR). • Custom bow pulpit and dual corner stern rails with LED navigation lights. • Four 4-bolt SS mooring cleats/eyes. • Interior ventilation from four framed opening ports in sides of cabin trunk, one offshore skylight deck hatch aft of mast, and one large offshore deck hatch forward of the mast. • Acrylic offshore drop-board with inside/outside lockable hasp. • Four polypropylene mesh line bags. • Custom SS forestay, shroud and backstay chainplates.

PLUMBING & ELECTRICAL

•  104 gallon (per side) seawater ballast system with molded tanks, transfer valves and overboard drain.•  24-gallon fuel tank with baffles and inspection port.•  12-gallon head holding tank.•  Raritan PH-II head with deck pump-out.
•  Manual fresh water system with 26-gallon water tank and manual pumps and spigots in the galley and head.•  Cockpit operated manual bilge pump.•  Two 105 amp deep-cycle, Group 31 sealed AGM batteries.•  Three position battery switch.    •  Electrical panel w/circuit breakers.•  Bonding system.•  Five low profile, LED reading lights.•  One adjustable red/white light in Nav station • Six red/white LED dome lights •  Automatic bilge pump with manual/auto panel switch.•  Belowdeck OSR manual bilge pump.

SPARS & RIGGING
•  Carbon fiber, auto-clave cured mast with double swept back spreaders, backstay crane, flush shroud terminations, sheaves for 1 main, 1 inner jib/staysail, 2 jib & 2 spinnaker halyards, vang and boom gooseneck fittings, steaming/foredeck light, masthead anchor/Tri-color light, internal wiring conduit, aluminum masthead bracket for owner provided wand.  Antal mast track and loader gate. Mast/boom finished in black with contrasting white measurement bands. •  Carbon fiber, racing boom with 12:1 internal outhaul, one mainsheet block bale, vang lug, and sheaves for two reef lines and outhaul. •  Nitronic 50 discontinuous rod rigging package including shrouds and forestay.•  Adjustable open body shroud turnbuckles.•  DSK-90 Dyneema backstay connected to Harken integral hydraulic backstay adjuster operable on centerline just aft of the helm.•  Jib roller furling system. •  Carbon fiber bow sprit with internal bearing system and black painted finish.  Fully extended position is supported by a Dyneema bobstay.  Stored position is retracted aft of the stem for safer docking and maneuvering.•  Running rigging package with GP78 Main halyard, V100 Jib halyard, GP78 spin/Code 0 halyard, one Inner Jib Halyard with integral halyard lock, 2nd spinnaker halyard, one mainsheet, two reef lines, two jib sheets, and two spinnaker sheets.  Also includes cunningham, boom vang, outhaul, pole control, 2 tack lines, inhauler and floating jib ring lines, and traveler control lines. 
•  Rigid boom vang with control lines led P&S to cockpit.

Interior
•  Off-white, low-maintenance bulkheads.•  Molded engine box cover with 1” sound insulation.•  Walled-in companionway entrance with angled treads and grab rails for secure passage. •  Quarter cabin aft of the galley with below berth storage and split berth cushions.•  Low maintenance, synthetic, high-wear cabin flooring.•  SS overhead handrails in main salon P&S.•  Two large acrylic fixed portlights.•  Two 6’6” settee berths, each with a fold-up pilot berth outboard - for a total of four berths in the main cabin.•  Storage outboard of settee berth back rests. •  Sit-down, forward-facing nav station with two drawers & hinged-lid access to chart storage, outboard instrument panel and storage bin.•  L-galley with sink, faucet, fresh water foot pump, sink drain seacock, ice box with top opening, gimballed LPG 2-burner cooktop, and storage cabinet outboard with acrylic sliders.•  Walk-through aft head with sink, faucet, shower sump drain and under counter storage area. •  Large storage area accessible through the head and via the starboard cockpit seat locker.



FACTORY ADDED OPTIONS
  • Systems Group -  (hot water heater, aft head shower, cockpit shower
  • Carbon Fiber Boom Upgrade
  • 110V Shore power System
  • 3-Blade Gori Prop in lieu of the standard 2-blade
  • Black Powder Coated Stanchions & Rails
  • Antal RC290 Mooring Cleats (4) in lieu of STD
  • LPG Stove/Oven with LPG Locker
  • DC Refrigeration (Frigoboat Capri 35 Air-cooled)
  • Transom Fold Down Swim Ladder (4 steps)
  • Jefa Auto-Pilot Direct Drive Kit
  • Opening Ports (2) on Aft Face of Cabin
  • Opening Port (1) in Cockpit well into Port Aft Cabin
  • V-Berth Option (no doors & no cushions)
  • Two-Tone Deck
ELECTRONICS & NAVIGATION
  • B&G Hercules H5000 processor
  • B&G H5000 Autopilot processor
  • Twin H5000 Graphic displays along the companionway
  • Jefa Direct autopilot drive
  • H5000 Autopilot display
  • B&G Zeus3 9" Display mounted at nav station
  • B&G NAIS500 AIS transponder
  • B&G V60 VHF with cockpit remote and wireless remote
  • 20/20 Mast Displays
  • Vertical mast wind sensor
  • Precision 9 Fluxgate Compass
  • NMEA2000 depth sensor
  • Twin boat speed sensors
SAIL INVENTORY
  • Mainsail - 2023
  • 3DI J1- 2022
  • J2
  • A1
  • A2
  • J4 ON FURLER 
  • CODE 0 ON FURLER 
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.